Datasheet

Bit 12 – SERCOM0 Interrupt Flag for SERCOM0
This bit is set when a Peripheral Access Error occurs while accessing the SERCOM0, and will generate
an interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 11 – FREQM Interrupt Flag for FREQM
This bit is set when a Peripheral Access Error occurs while accessing the FREQM, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 10 – EIC Interrupt Flag for EIC
This bit is set when a Peripheral Access Error occurs while accessing the EIC, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 9 – RTC Interrupt Flag for RTC
This bit is set when a Peripheral Access Error occurs while accessing the RTC, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 8 – WDT Interrupt Flag for WDT
This bit is set when a Peripheral Access Error occurs while accessing the WDT, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 7 – GCLK Interrupt Flag for GCLK
This bit is set when a Peripheral Access Error occurs while accessing the GCLK, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 6 – SUPC Interrupt Flag for SUPC
This bit is set when a Peripheral Access Error occurs while accessing the SUPC, and will generate an
interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
Bit 5 – OSC32KCTRL Interrupt Flag for OSC32KCTRL
This bit is set when a Peripheral Access Error occurs while accessing the OSC32KCTRL, and will
generate an interrupt request if SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the flag.
SAM D5x/E5x Family Data Sheet
PAC - Peripheral Access Controller
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 741