Datasheet

...........continued
Symbol Parameter Conditions
Measurement
Unit
Min Typ Max
Offset
Offset Error with
SAMPCTRL.OFFCOMP=1
Fadc =
1Msps
Vddana=3.0V
Vref=Vddana
-21 -7.2 +9.3
mV
Vddana=3.0V
ExtVref=2.0V
-21 -3.3 +17
Vddana=3.0V
1V internal Ref
-25 -4.2 +26
Vddana=3.0V
Vref=Vddana/2
-27 -3.1 +24
SFDR Spurious Free Dynamic Range
Fs = 1Msps
Fin = 14kHz
(2)
Vddana=3.0V
Vref=Vddana
67.9 69.2 76.3
dB
SINAD
Signal to Noise and Distortion
ratio
55.6 57.5 61.1
SNR Signal to Noise ratio 54.7 56.9 60.6
THD Total Harmonic Distortion -73.7 -68.2 -65.8
Nrms Noise RMS
constant input
voltage
Vddana=3.0V
ExtVref=2.0V
0.3 1.0 2.3
mV
Vddana=3.0V
Vref=Vddana
0.1 0.35 2.45
Note:
1. These values are based on characterization. These values are not covered by test limits in
production.
2. All values expressed in decibel refer to the full scale input and are tested with an input signal
0.35dB below full scale; THD measured on the first seven harmonics of the input signal.
3. With REFCTRL.REFCOMP=1 and SAMPCTRL.OFFCOMP=1.
SAM D5x/E5x Family Data Sheet
Electrical Characteristics at 125°C
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 2064