Datasheet

Table 56-10. BOD33 Power Consumption
Symbol CPU Mode Conditions T
A
Typ. Max Units
I
DD
Active / Idle VCC = 1.8V Max 125°C Typ 25°C 8.52 13.9 µA
VCC = 3.3V 10.10 16.5
Standby with BOD continuous normal
mode
VCC = 1.8V 4.71 6.7
VCC = 3.3V 6.01 8.6
Standby with BOD continuous low
power mode or Hibernate mode
VCC = 1.8V 0.15 0.27
VCC = 3.3V 0.21 0.35
56.6.3 Analog-to-Digital Converter (ADC) Characteristics (125°C)
Analog-to-Digital Converter conditions table is the same as 105°C.
Table 56-11. Differential Mode
(1)
Symbol
Parameter Conditions
Measurement
Unit
Min Typ Max
ENOB Effective Number of bits Fadc = 1Msps - R2R disabled
Vddana=3.0V Vref=Vddana 10.5 10.8 11.2
bits
Vddana=3.0V ExtVref=2.0V 10.5 10.8 11.0
TUE Total Unadjusted Error
(3)
Fadc = 1Msps - R2R disabled
Vddana=3.0V Vref=Vddana - +/-2.3 +/-5.2
LSB
Vddana=3.0V ExtVref=2.0V - +/-2.7 +/-5.8
INL Integral Non Linearity Fadc = 1Msps - R2R disabled
Vddana=3.0V Vref=Vddana - +/-1.2 +/-1.8
Vddana=3.0V ExtVref=2.0V - +/-1.2 +/-1.9
DNL Differential Non Linearity Fadc = 1Msps - R2R disabled
Vddana=3.0V Vref=Vddana - +/-0.98 -1/+1
Vddana=3.0V ExtVref=2.0V - +/-0.96 -1/+1.2
Gain Gain Error with REFCTRL.REFCOMP=1 Fadc = 1Msps
Vddana=3.0V Vref=Vddana -0.21 -0.02 +0.2
%
Vddana=3.0V ExtVref=2.0V -0.13 +0.03 +0.21
Vddana=3.0V 1V internal Ref -10 -1 +6.7
Vddana=3.0V Vref=Vddana/2 -0.48 +0.2 +0.75
Gain Gain Error with REFCTRL.REFCOMP=0 Fadc = 1Msps
Vddana=3.0V Vref=Vddana -0.3 -0.001 +0.2
mV
Vddana=3.0V ExtVref=2.0V -0.94 -0.05 +0.71
Vddana=3.0V 1V internal Ref -10 -1 +6.7
Vddana=3.0V Vref=Vddana/2 -1.2 +0.11 +1.28
Offset Offset Error with SAMPCTRL.OFFCOMP=1 Fadc = 1Msps
Vddana=3.0V Vref=Vddana -3.6 -0.24 +3.1
%
Vddana=3.0V ExtVref=2.0V -3.3 -0.2 +2.7
Vddana=3.0V 1V internal Ref -3.6 -0.2 +2.9
Vddana=3.0V Vref=Vddana/2 -3.6 -0.34 +3.3
Offset Offset Error with SAMPCTRL.OFFCOMP=0 Fadc = 1Msps
Vddana=3.0V Vref=Vddana -11.9 +0.03 +/-12.3
mV
Vddana=3.0V ExtVref=2.0V -12.2 -0.03 +12.4
Vddana=3.0V 1V internal Ref -14.3 +0.5 +14.7
Vddana=3.0V Vref=Vddana/2 -13.6 +0.5 +14
SFDR Spurious Free Dynamic Range
Fs = 1Msps Fin = 14kHz
(2)
Vddana=3.0V Vref=Vddana
76.6 79.6 83.5
dB
SINAD Signal to Noise and Distortion ratio 65.3 67.2 68.9
SNR Signal to Noise ratio 64.7 66.5 68.2
THD Total Harmonic Distortion -91.6 -82.9 -78.3
Nrms Noise RMS constant input voltage
Vddana=3.0V ExtVref=2.0V 0.2 0.4 2.4
mV
Vddana=3.0V Vref=Vddana 0.15 0.25 2.5
SAM D5x/E5x Family Data Sheet
Electrical Characteristics at 125°C
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 2062