Datasheet

56. Electrical Characteristics at 125°C
The specifications for 125°C temperature devices are identical to those shown in 54. Electrical
Characteristics at 85°C, with the exception of the parameters listed in this chapter.
56.1 General Operating Ratings (125°C)
The device must operate within the ratings listed below in order for all other electrical characteristics and
typical characteristics of the device to be valid.
Table 56-1. General Operating Conditions
Symbol Description Min. Typ. Max. Units
T
A
Temperature range -40 25 125 °C
T
J
Junction temperature - - 145 °C
56.2 Injection Current (125°C)
Stresses beyond those listed in the table below may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or other conditions beyond those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Table 56-2. Injection Current
(1, 2)
Symbol Description min Typ. max Unit Comments
I
ICL
Input Low Injection Current -15 - - mA Note: 1, 4, 5
This Parameter applies to all pins.
I
ICH
Input High Injection Current - - 15 mA Note: 2, 3, 4, 5
This parameter applies to all pins, with the
exception of 5V tolerant pins.
∑I
ICT
Total Input Injection Current (Sum
of all I/O and control pins)
Absolute value of |∑I
ICT
|
- - 18 mA Absolute instantaneous sum of all ± input injection
currents from all I/O pins.
SAM D5x/E5x Family Data Sheet
Electrical Characteristics at 125°C
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 2053