Datasheet

Table 55-18. Power Consumption
(1)
Symbol Parameters
PTC scan
rate (msec)
Oversamples Ta Typ. Max Units
IDD Current Consumption
10
4
Max 105°C Typ 25°C
137 2174
µA
16 146 2194
50
4 77 2098
16 79 2104
100
4 68 2092
16 69 2095
200
4 64 2086
16 65 2089
Note:
1. These are based on characterization.
55.5 NVM Characteristics
Table 55-19. NVM Flash Read Wait States for Worst Case Conditions
CPU Fmax (MHz) 0 WS 1 WS 2 WS 3 WS 4 WS 5 WS 6 WS Auto WS
Read Operations 1 cycle 2 cycles 3 cycles 4 cycles 5 cycles 6 cycles 7 cycles n cycles
VDD > 1.71V 19 38 57 76 95 100 120 120
Maximum operating frequencies are given in the table above, but are limited by the Embedded Flash
access time when the processor is fetching code out of it. Theses tables provide the device maximum
operating frequency defined by the field RWS of the NVMCTRL CTRLA register when automatic wait
states (AUTOWS) is disabled. This field defines the number of Wait states required to access the
Embedded Flash Memory.
SAM D5x/E5x Family Data Sheet
Electrical Characteristics at 105°C
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 2049