Datasheet

54. Electrical Characteristics at 85°C
54.1 Disclaimer
All typical values are measured at T = 25°C unless otherwise specified. All minimum and maximum
values are valid across operating temperature and voltage unless otherwise specified.
54.2 Absolute Maximum Ratings
Stresses beyond those listed in the table below may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or other conditions beyond those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Table 54-1. Absolute Maximum Ratings
Symbol Description Min. Max. Units
V
DD
Power supply voltage 0 3.8 V
I
VDD
Current into a V
DD
pin
(1,2)
- 60 mA
I
GND
Current out of a GND pin - 45 mA
V
PIN
Pin voltage with respect to GND and V
DD
GND-0.6V VDD+0.6V V
T
storage
Storage temperature -60 150 °C
Note:
1. For 100-pin packages: I
VDD
(pin 92) = 360 mA and I
VDD
(pin 77) = 210 mA.
2. For 128-pin packages: I
VDD
(pin 118) = 360 mA and I
VDD
(pin 97) = 210 mA.
CAUTION
This device is sensitive to electrostatic discharges (ESD). Improper handling may lead to
permanent performance degradation or malfunctioning.
Handle the device following best practice ESD protection rules: Be aware that the human body
can accumulate charges large enough to impair functionality or destroy the device.
54.3 General Operating Ratings
The device must operate within the ratings listed below in order for all other electrical characteristics and
typical characteristics of the device to be valid.
Table 54-2. General Operating Conditions
Symbol Description Min. Typ. Max. Units
V
DDIO
IO Supply Voltage 1.71
(1)
3.3 3.63 V
V
DDIOB
IOB Supply Voltage 1.71
(1)
3.3 3.63 V
V
DDANA
Analog supply voltage 1.71
(1)
3.3 3.63 V
SAM D5x/E5x Family Data Sheet
Electrical Characteristics at 85°C
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1986