Manualshelf

Datasheet

ManualsBrandsSeeedStudio ManualsInternet of Things (IoT)Wio Terminal ATSAMD51 Core w/ Realtek RTL8720DN BLE 5 & Wi-Fi 2.4G/5G Dev Board
1861186218631864186518661867186818691870
Table Of Contents
Value Description
0
The Non-Recoverable Fault x interrupt is disabled.
1
The Non-Recoverable Fault x interrupt is enabled.
Bit 13 – FAULTB Recoverable Fault B Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will set the Recoverable Fault B Interrupt Disable/Enable bit, which enables the
Recoverable Fault B interrupt.
Value Description
0
The Recoverable Fault B interrupt is disabled.
1
The Recoverable Fault B interrupt is enabled.
Bit 12 – FAULTA Recoverable Fault A Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will set the Recoverable Fault A Interrupt Disable/Enable bit, which enables the
Recoverable Fault A interrupt.
Value Description
0
The Recoverable Fault A interrupt is disabled.
1
The Recoverable Fault A interrupt is enabled.
Bit 11 – DFS Non-Recoverable Debug Fault Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will set the Debug Fault State Interrupt Disable/Enable bit, which enables the
Debug Fault State interrupt.
Value Description
0
The Debug Fault State interrupt is disabled.
1
The Debug Fault State interrupt is enabled.
Bit 10 – UFS Non-Recoverable Update Fault Interrupt Enable
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Non-Recoverable Update Fault Interrupt Disable/Enable bit, which
enables the Non-Recoverable Update Fault interrupt.
Note:  This bit is only available on variant L devices. Refer to the Configuration Summary for more
information.
Value Description
0
The Non-Recoverable Update Fault interrupt is disabled.
1
The Non-Recoverable Update Fault interrupt is enabled.
Bit 3 – ERR Error Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will set the Error Interrupt Disable/Enable bit, which enables the Compare interrupt.
Value Description
0
The Error interrupt is disabled.
1
The Error interrupt is enabled.
Bit 2 – CNT Counter Interrupt Enable
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will set the Retrigger Interrupt Disable/Enable bit, which enables the Counter
interrupt.
SAM D5x/E5x Family Data Sheet
TCC – Timer/Counter for Control Applications
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1864