Datasheet

45.8.20 DSEQCTRL
Name: DSEQCTRL
Offset: 0x38
Reset: 0x00000000
Property: PAC Write-Protection
Bit 31 30 29 28 27 26 25 24
AUTOSTART
Access
R/W
Reset 0
Bit 23 22 21 20 19 18 17 16
Access
Reset
Bit 15 14 13 12 11 10 9 8
OFFSETCORR
Access
R/W
Reset 0
Bit 7 6 5 4 3 2 1 0
GAINCORR WINUT WINLT SAMPCTRL AVGCTRL REFCTRL CTRLB INPUTCTRL
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 31 – AUTOSTART ADC Auto-Start Conversion
Value Description
0
ADC conversion starts when a DMA sequence is complete and a start software or event
trigger is received.
1
ADC conversion automatically starts when a DMA sequence is complete. This setting is
ignored if the convertion start by event is enabled (EVCTRL.STARTEI=1).
Bit 8 – OFFSETCORR Offset Correction
Value Description
0
DMA update of the Offset Correction register is disabled.
1
DMA update of the Offset Correction register is enabled.
Bit 7 – GAINCORR Gain Correction
Value Description
0
DMA update of the Gain Correction register is disabled.
1
DMA update of the Gain Correction register is enabled.
Bit 6 – WINUT Window Monitor Upper Threshold
Value Description
0
DMA update of the Window Monitor Upper Threshold register is disabled.
1
DMA update of the Window Monitor Upper Threshold register is enabled.
SAM D5x/E5x Family Data Sheet
ADC – Analog-to-Digital Converter
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1633