Datasheet

39.8.18 Interrupt Line Select
Name: ILS
Offset: 0x58
Reset: 0x00000000
Property: -
The Interrupt Line Select register assigns an interrupt generated by a specific interrupt flag from IR to one
of the two module interrupt lines.
Bit 31 30 29 28 27 26 25 24
ARAL PEDL PEAL WDIL BOL EWL
Access
R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
EPL ELOL BEUL BECL DRXL TOOL MRAFL TSWL
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
TEFLL TEFFL TEFWL TEFNL TFEL TCFL TCL HPML
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
RF1LL RF1FL RF1WL RF1NL RF0LL RF0FL RF0WL RF0NL
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 29 – ARAL Access to Reserved Address Interrupt Line
Value Description
0
Interrupt assigned to CAN interrupt line 0.
1
Interrupt assigned to CAN interrupt line 1.
Bit 28 – PEDL Protocol Error in Data Phase Interrupt Line
Value Description
0
Interrupt assigned to CAN interrupt line 0.
1
Interrupt assigned to CAN interrupt line 1.
Bit 27 – PEAL Protocol Error in Arbitration Phase Interrupt Line
Value Description
0
Interrupt assigned to CAN interrupt line 0.
1
Interrupt assigned to CAN interrupt line 1.
Bit 26 – WDIL Watchdog Interrupt Line
Value Description
0
Interrupt assigned to CAN interrupt line 0.
1
Interrupt assigned to CAN interrupt line 1.
SAM D5x/E5x Family Data Sheet
CAN - Control Area Network
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1262