Datasheet

36.8.5 Interrupt Enable Set
Name: INTENSET
Offset: 0x16
Reset: 0x00
Property: PAC Write-Protection
This register allows the user to enable an interrupt without doing a read-modify-write operation. Changes
in this register will also be reflected in the Interrupt Enable Clear register (INTENCLR).
Bit 7 6 5 4 3 2 1 0
ERROR DRDY AMATCH PREC
Access
R/W R/W R/W R/W
Reset 0 0 0 0
Bit 7 – ERROR Error Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Error Interrupt Enable bit, which enables the Error interrupt.
Value Description
0
Error interrupt is disabled.
1
Error interrupt is enabled.
Bit 2 – DRDY Data Ready Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Data Ready bit, which enables the Data Ready interrupt.
Value Description
0
The Data Ready interrupt is disabled.
1
The Data Ready interrupt is enabled.
Bit 1 – AMATCH Address Match Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Address Match Interrupt Enable bit, which enables the Address Match
interrupt.
Value Description
0
The Address Match interrupt is disabled.
1
The Address Match interrupt is enabled.
Bit 0 – PREC Stop Received Interrupt Enable
Writing '0' to this bit has no effect.
Writing '1' to this bit will set the Stop Received Interrupt Enable bit, which enables the Stop Received
interrupt.
Value Description
0
The Stop Received interrupt is disabled.
1
The Stop Received interrupt is enabled.
SAM D5x/E5x Family Data Sheet
SERCOM I2C – Inter-Integrated Circuit
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 1038