User Manual

FAQ
Q:
A:
How can I access the BIOS setup?
Press the Power Button and keep pressing DEL key until you see the
BIOS Setup.
Q:
A:
Arduino IDE doesn’t recognize the onboard microcontroller
Add a jumper wire between pins 3 and 4 of UART pins on the 28-pin
header to reset the AMSAMDG21.
Q:
A:
ODYSSEY - X86J4105 doesn’t power up
Make sure you use the 12V/2A power adapter provided in the box and
check the connection.
Q:
A:
I cannot connect to Wi-Fi and Bluetooth
Check BIOS settings and enable Wi-Fi and Bluetooth from BIOS.
If you have any further questions, please visit forum.seeedstudio.com or send an
email to [e-mail]