User Manual
6.2 Description of the output of the body motion amplitude parameter
Body movement amplitude parameters
0%
None
Environmental unmanned
1%
Stationary (sleep)
Only breathing without
body movement
2% - 30%
Micro-Movements
Only minor head or limb
movements Movement
31% - 60%
Walking/fast body movements
Slower body movements
61% - 100%
Running/close range big
moves
Rapid body movement
7. Description of the agreement
This protocol is used to communicate between a 24G millimetre wave sleep
detection radar and a host computer.
This protocol outlines the radar workflow, provides a brief introduction to the
interface protocol component architecture and gives the control commands
and data required for the operation of the relevant radar, with the serial
communication defined as follows.
Interface level: TTL
Baud rate: 9600bps
Stop bits: 1
Data bits: 8
Parity: None
8. Communication commands and parameter definitions
8.1 Definition and description of the frame structure
A. Frame structure definition