User Manual

Functions
Status change time/function explanation
DP4: Body movement amplitude
parameter 0 - 100
Data output once every 5 seconds
Reference (description of output of body
motion amplitude parameters)
DP5: Sensitivity setting 1 - 10 steps
Default scene mode, adapted to 10 positions
of adjustment
DP6: Scene modes (bed, bathroom, hotel,
bedroom, office, default mode)
Adapted to different scenarios according to
the size of the area
DP7: No false alarm confirmation prompt
DP8: Sleep parameter switch
Off by default, sleep function only works
when on
DP9: Bed entry/exit
Output status in 3S clock
DP10: Number of bed entries/exits
Count the number of times you enter/leave
bed in a day
DP11: Stationary dwell alarms
Outputs in three states, once every 10
minutes
DP12: Length of Sobriety
DP13: Length of light sleep
DP14: Length of deep sleep
DP15: Breathing rate
Normal number of breaths can be tested
DP16: Breathing rate detection signal
If there are factors such as distance, range
and other effects, output breath-holding
abnormalities, good signals, abnormal
movements, abnormal states of shortness of
breath
DP17: Sleep scoring (optional, users can
rate according to their own way)
Combined day's sleep rating