Datasheet

MR24BSD1)
!
12!
functions of the sleep detection radar are required, the installation
method can only be selected as top-mounted or tilt-mounted, with
the radar installation height not higher than 2.75m, and the
installation scenario is only suitable for resting areas such as the top
of the bedroom bed
6. Typical application models
This module is mainly applied with home, home appliances, energy-saving
light control, health care and other scenarios, the following application
mode for typical scenarios is explained.
6.1. smart appliance applications
The radar is installed inside the appliance and monitors the working
surface of the appliance in real time. The appliance adjusts the working
mode of the appliance (working, low power consumption, standby, off, etc.)
in real or quasi-real time according to the status of the working surface
personnel (occupied/unoccupied, active/stationary, close/away) to realise
the intelligence of the appliance.
In this application scenario, the radar is installed on the appliance radar
and, depending on the regular nature of the appliance's work, the radar is
set to be installed horizontally or at an angle to ensure that the radar
beam can cover the main area of the appliance's work.
Conventional appliance equipment includes.
• Smart TVs
• Smart speakers
• Smart air conditioners
• Other smart home appliances
6.2. home applications
For places such as homes, hotels, offices and bathrooms, there is a need
for real-time detection of whether people are entering or whether people
are moving in the place, thus enabling ways such as security, electrical
control, personnel monitoring, etc. and being able to effectively avoid