Datasheet

! ! MR24FDB1!
!
16
reports the fall status alarm in real time, the main states
include.
4. Judgement of suspected fall status.
5. Judgement of fall status.
6. Long stay alarm status judgement.
In the fall detection mode, the radar module needs to be installed on
top of the roof, at a height of ≤ 2.75m, in slippery and potentially fall-
prone situations such as kitchens and bathrooms, in order to detect
the accuracy of the judgement.
6. Typical application models
This module is mainly applied with home, home appliances, energy-saving
light control, health care and other scenarios, the following application mode
for typical scenarios is explained.
6.1. smart appliance applications
The radar is installed inside the appliance and monitors the working surface
of the appliance in real time. The appliance adjusts the working mode of the
appliance (working, low power consumption, standby, off, etc.) in real or
quasi-real time according to the status of the working surface personnel
(occupied/unoccupied, active/stationary, close/away) to realise the
intelligence of the appliance.
In this application scenario, the radar is installed on the appliance radar and,
depending on the regular nature of the appliance's work, the radar is set to
be installed horizontally or at an angle to ensure that the radar beam can
cover the main area of the appliance's work.
Conventional appliance equipment includes.
• Smart TVs
• Smart speakers