User Manual

MR24HPB1
8
6.2. Description of the output of the body motion amplitude parameter
Body movement amplitude parameters
0%
None
Environmental unmanned
1%
Stationary (sleep)
Only breathing without
body movement
2% - 30%
Micro-Movements
Only minor head or limb
movements Movement
31% - 60%
Walking/fast body movements
Slower body movements
61% - 100%
Running/close range big moves
Rapid body movement
7. Description of the agreement
This protocol is used to communicate between a 24G millimetre wave sleep
detection radar and a host computer.
This protocol outlines the radar workflow, provides a brief introduction to the
interface protocol component architecture and gives the control commands
and data required for the operation of the relevant radar, with the serial
communication defined as follows.
l Interface level: TTL
l Baud rate: 9600bps
l Stop bits: 1
l Data bits: 8
l Parity: None