Manual

User manual/ Technical information
© 2008-2020 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
The 36 Page total 50
384 for 38400, 576 for 57600, and 1152 for 115200.
For example, the return value is 0XA;MBBD=96 represents the successful setting of the baud rate
of 9,600
Device Name NA
Query
Send 0XA; NA=?<CR><LF>
Response 0XA; NA=SenseCAP ONE S700<CR><LF>
Description Device name is: SenseCAP ONE S700
Setting
Send 0XA; NA=[na]<CR><LF>
Response 0XA; NA=[na] <CR><LF>
Description Set the new device name to [na], and the character length limitation is 64 bytes
Device model TP
Query
Send 0XA; TP=?<CR><LF>
Response 0XA; TP=SenseCAP ONE S700<CR><LF>
Description The device model is SenseCAP ONE S700
Device version VE
Query
Send 0XA; VE=?<CR><LF>
Response 0XA; VE=HW-1.0&SW-2.0&S1-2.2<CR><LF>
Description
Device hardware(HW) is v1.0, the software firmware(SW) is v2.0, and the #1 driver board
firmware is v2.2
Device serial number S/N
Query
Send 0XA; S/N=?<CR><LF>
Response 0XA; S/N=1019906922012011<CR><LF>
Description S/N represents the serial number of the device
Production date MD
Query
Send 0XA; MD=?<CR><LF>
Response 0XA; MD=20201027<CR><LF>
Description The production date of the return device is October 27, 2020, 20201027
Restore configuration RESTORE
Setting
Send 0XA; RESTORE=1<CR><LF>
Response 0XA; RESTORE=1<CR><LF>
Description Return 0XA; RESTORE=1 means the setting is successful and return 0XA means the setting fails.
Electronic Compass CC
Query
Send 0XA;CC=?<CR><LF>
Response 0XA;CC=[cc]<CR><LF>
Description
[cc] Electronic Compass offset state
Y Enable Electronic Compass
N Disable Electronic Compass
C Enable Geomagnetic compensation
Setting
Send 0XA;CC=Y<CR><LF>
Response 0XA;CC=Y<CR><LF>
Description Enable Electronic Compass
Send 0XA;CC=N<CR><LF>
Response 0XA;CC=N<CR><LF>