Manual

User manual/ Technical information
© 2008-2020 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
The 24 Page total 50
Serial debug tool
The communication settings are as follows:
Select the serial port You can find port information in your computer's device manager
Baud rate 9600bps, 8 data bits, 1 stop bits, none parity, none flow control.
 In the Serial Debug Assistant, select the corresponding COM port.
 Check the "click Enter to start a new line" check box.
 Set the baud rate to 9,600.
 Send ? in the send area.
 If you receive the corresponding 0XA message in the serial receive window, the