Manual

User manual/ Technical information

The 18 Page total 50

Configure the device via USB port

There is a waterproof round cover at the bottom of the device. Turn it counterclockwise to

remove this cover, and you can see a USB Type-C connector and a configuration button.

Connect the device to your computer with a USB Type-C cable. The computer will automatically

install the device driver. After the driver is successfully installed, you can see a serial port in the

device's manager.

If the driver is not installed automatically, click this link to manually download and install the

driver.

There are two methods to configure the device:

 SenseCAP ONE Configuration Tool

 Serial debug tool