User Manual

User manual/ Technical information
© 2008-2020 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
The 22 Page total 50
On the configuration page, you can modify the following: device name, data type, and data
upload interval. After any modification, you will need to click “Write to Device” for the
changes to take effect.
In application settings, you can set the cycle for the tool to read sensor data, with the minimum
as 2S, and a dot range for the curve.
Click “Firmware Update” to update the device firmware. Please contact sales or technical
support at ([e-mail]) to get the firmware.