User Manual
Table Of Contents
User Guide
©2008-2020 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
12 / 23
EC TEMP COFF
Parameter range
0-100 corresponds to 0.0%-10.0%
Default: 20（2%）
Parameter storage
None
Significance: the temperature compensation coefficient of electrical conductivity
SALINITY COFF
Parameter range
0-100 corresponds to 0.00-1.00
Default: 55（0.55）
Parameter storage
None
Significance: Salinity / conductivity compensation coefficient
TDS COFF
Parameter range
0-100 corresponds to 0.00-1.00
Default: 50（0.50）
Parameter storage
None
Significance: TDS/ conductivity compensation coefficient
SLAVE ADDR --- Modbus address
Parameter range
0-255
Default:1
Parameter storage
Immediate storage
Modbus address can be set to 0-255. When outside of the module address the dip switch setting to
address 0, using the contents of the register as a slave address. After setting need to re power or use
the rst command restart module, the entry into force of this address. The use of the command to
change the module address does not need to open the cabinet can be arranged.
BAUDRATE
Parameter range
0-5
0:1200bps
1:2400bps
2:4800bps
3:9600bps
Default:3