Datasheet

SenseCAP ORCH S4
v1.0
Product Model SenseCAP ORCH S4
Microcontroller Ultra-low-power MCU
Interface RS-485
Protocol
MODBUS-RTU RS485/ MODBUS-ASCII
RS485/ SDI-12 (v1.4)
IP Rating
IP66 (water-proof box)
IPX5 (solar radiation shield)
Enclosure Material Engineering plastics
Operating Temperature -40
℃
to +65
℃
Operating Humidity 0 to 100 %RH (non-condensing)
Cable Length 2 meters
Device Weight 870g
General Parameters
Certication
Power Supply 3.6V ~ 16V
Current Consumption
Vin=16V: 3.6mA (typical)
Vin=12V: 4.7mA (typical)
Vin=5V: 11.0mA (typical)
Vin=3.6V: 14.5mA (typical)
Warm-up Time 250ms (typical)
Scan Interval 1s
Poll Rate 1Hz
Response Time ≤ 4ms
MODBUS RS-485
Power Supply 3.6V ~ 16V
Current Consumption
(Sleep Mode)
Vin=16V: 40.0μA (typical)
Vin=12V: 45.3μA (typical)
Vin=5V: 77.6μA (typical)
Vin=3.6V: 2.2mA (typical)
Current Consumption
(Active Mode)
Vin=16V: 3.04mA (typical)
Vin=12V: 3.98mA (typical)
Vin=5V: 8.85mA (typical)
Vin=3.6V: 11.80mA (typical)
Warm-up Time 15ms
Scan Interval 350ms (typical)
SDI-12
Website: www.seeedstudio.com
Email: [e-mail]
Phone: [phone]
Address
：
F9, Building G3, TCL International E City, Zhongshanyuan Road, Nanshan District, Shenzhen, China.
© 2008-2020 Seeed Technology Co., Ltd. All rights reserved.
Device Dimensions