User Guide
Table Of Contents
- Table of Contents
- 1 Product Introduction
- 2 Quick Start
- 3 Device Installation
- 4 Network Configuration
- 5 SenseCAP Portal
- 6 SenseCAP App Instructions
- 7 API Instruction
User Guide (Tech Document)
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
27 / 50
4.1.2 Connecting to 4G
Please refer to the previous chapter to install a SIM card. Please make sure it is a 4G SIM card because
the device only supports the 4G network. Then connect the gateway to the Ethernet cable and power
cable. Power on the gateway. The process and LED indications are the same as connecting to Ethernet
(as shown above).