User Guide
Table Of Contents
- Table of Contents
- 1 Product Introduction
- 2 Quick Start
- 3 Device Installation
- 4 Network Configuration
- 5 SenseCAP Portal
- 6 SenseCAP App Instructions
- 7 API Instruction
User Guide (Tech Document)
© 2008-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
18 / 50
3) Use a 1-meter antenna feed line to connect the lightening arrester with the fiberglass antenna.
3.2.7 Installing Ground Cable
Here we will connect the lightening arrester to the GND screw port on the gateway with a ground cable,
and then connect the whole device to the ground. The image below shows the location of the GND port at
the backside of the gateway.