Data Sheet

Page 26 ams Datasheet
Document Feedback [v1-06] 2018-Jun-20
AS5600 − Register Description
Figure 28:
Output Characteristic Over a Range Smaller Than 360°
If the maximum angular range is smaller than 360 degrees, the
DAC resolution is automatically reduced. If θ
max
is the maximum
angle, the number of steps N of the output signal OUT is:
N = (θ
max
/360) × 4096
The AS5600 also allows selecting the output dynamic
characteristics of the OUT signal with the OUTS bits in the CONF
register. By default (OUTS = 00), the output can cover the full
voltage range (0V to VDD), but a reduced range from 10% to
90% between GND and VDD may be programmed (OUTS = 01).
Figure 29:
Output Characteristics with Reduced Output Range (10%-90%)
Output Voltage AOUT[V]
VDD
Angle (DEG)
0 DEG θMAX
λ
λ
360 DEG
Output Voltage AOUT[V]
VDD
Angle (DEG)
0 D EG θMA X
90% VDD
10% VDD