Datasheet

Example
Now you should be familiar with your Base Shield and Grove units, so let's examine them in more detail
with the following projects:
 Project One - Blink
 Project Two - Digital Input v1.0b
 Project Three – Analog Input v1.0b
 Project Four – Noise Maker
 Project Five – Relay Control
 Project Six – LCD Demonstration
 Project Seven - Temperature
 Project Eight - Thermostat
Furthermore, if you are using a Seeeduino or Seeeduino Mega, make sure you have the switches set to
5V and auto, as such:
This ensures the board is running at 5V DC from the USB cable, and that the board will auto-reset upon
uploading your sketch. Otherwise you will have to manually reset your Seeeduino before the sketch
starts operation.