User's Manual

\r\n+LOSSRECONN=1\r\n Permit auto-reconnecting.
Commands for Normal Operation:
1. Inquire
a) Master
\r\n+INQ=0\r\n Stop Inquiring
\r\n+INQ=1\r\n Begin/Restart Inquiring
a) Slave
\r\n+INQ=0\r\n Disable been inquired
\r\n+INQ=1\r\n Enable been inquired
When +INQ=1 command is successful, the red and green LEDS blink
alternatively.
2. Bluetooth module returns inquiring result
\r\n+RTINQ=aa,bb,cc,dd,ee,ff;name\r\n
Serial Bluetooth device with the address
“aa,bb,cc,dd,ee,ff” and the name
3. Connect device
\r\n+CONN=aa,bb,cc,dd,ee,ff\r\n
Connect to a device with address of
"aa,bb,cc,dd,ee,ff”
4. Bluetooth module requests inputting PINCODE
\r\n+INPIN\r\n
5. Input PINCODE
\r\n+RTPIN=code\r\n
Example: RTPIN=0000, Input PINCODE which is four zero.