User manual

This product complies with the applicable national and European requirements.
Intended use
Thedigitaloscilloscopeisintendedtobeusedforvisualisingelectricalmagnitudesandsignals.
Themeasuringleadisconnectedtotheoscilloscopeviatwosockets.
Themeasuredsignalscanbestoredanddisplayedasareference.Thecontrolofthedeviceis
performed via VDU-based control menus.
Themaximuminputvariablesindicatedonthedevicemustneverbeexceeded.
A signal generator is also integrated into the instrument.
Any use other than that described above could lead to damage to this product and involves the
riskofshortcircuits,re,electricshock,etc.
Nopartoftheproductmaybemodiedorrebuilt,andthehousingmustnotbeopened.
Measurements are not permitted in damp rooms or outdoors, nor under adverse environmental
conditions.
Unfavourable ambient conditions are:
- Dampness or high air humidity,
- dust and combustible gases, vapours or solvents,
- thunderstormsorsimilarweatherconditionssuchasstrongelectrostaticelds,etc.
Thisquickguideexplainsthesafetymeasuresthatshouldbetakentomakeworkingwiththe
deviceassafeaspossible.Theindividualfunctionsofthedevicearedescribedinmoredetail
in the English operating instructions.
Always observe the safety notes included in the quick guide and operating instructions.
ThisproductcomplieswiththeapplicablenationalandEuropeanrequirements.Allnamesof
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Digital oscilloscope
• 2x measuring lead
• 2x replacement probe
• Storage bag
• Metal stand
• Screwdriver
• 2x 3M sticker
• Micro-USB cable
• Operating instructions in English
• Quick guide
Up-to-date Operating Instructions:
1. Open produktinfo.conrad.com in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item
numberintothesearcheld.Aftersubmittingthequery
you can download displayed records.
Explanation of symbols
An exclamation mark inside a triangle refers to important notes in the operating
instructions.
 Thelightningsymbolinsideatrianglewarnsofelectricshockdangerortheimpair-
ment of the electrical safety of the appliance.
 The“hand”symbolindicatesspecialinformationandadviceonoperatingthedevice.
S Show / hide menu // Submenu settings
▲ Directionbutton(moveyourngerup)
◄ Resetsettings(pressleft)//Reducevalues(movengertotheleft)
◄ Resetsettings(pressright)//Increasevalues(movengertotheright)
▼ Directionbutton(moveyourngerdown)
M Switch on / off the submenu selection
►II Start/Pause//Savecurrentsettings/Screendisplay(pressandhold)
On/Off switch
CHA InputA
CHB InputB
Wave Out Output of the frequency generator
Safety instructions
Please read through all the quick guide and operating instructions carefully
before using of the device, they contain important information on its correct
operation.
 Thewarrantywillbevoidintheeventofdamagecausedbyfailuretoobservethese
safety instructions! We do not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages caused
by the improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
 • Theunauthorisedconversionand/ormodicationoftheproductisnotpermitted
forsafetyandapprovalreasons(CE).Donotdisassembletheproduct.
 • This product is not a toy. Therefore, be especially careful when children are
around.
• First, connect the measurement cable to the oscilloscope; then connect the probe
tothe signalmeasuring circuitto be tested.Afternishing themeasurements,
rstdisconnectthemeasurementleadsfromthecircuitbeforeyoudisconnectthe
cable from the oscilloscope.
• Be especially cautious when dealing with voltages exceeding >30 V AC or >30 V
DC! Even at these voltages, there is a danger of fatal electric shock if you touch
electric conductors.
• Prior to each measurement, check your meter and its measuring leads for
damage(s).Nevertakeanymeasurementsiftheprotectinginsulationisdefective
(torn,missing,etc.).
 • Toeliminatetherisksofelectricshock,donotdirectlyorindirectlytouchthecon-
nections/measuring points during measurements.
• Never touch the probes outside of the marked handling area during a measure-
ment.Thereisdangerofalife-threateningelectricshock.
 • Donot usethedeviceshortlybeforeorafterathunderstorm(lightning!/high-
powersurges!).Makesurethatyourhands,shoes,clothing,theoor,themeasur-
ing device and/or measuring lines, circuits and circuit components are always dry.
 • Donotusetheproductinsideofrooms,orinpoorambientconditions,wheream-
mable gases, vapours or explosive dust may be present or are present.
• Do not operate the device near to:
  - strongmagneticorelectromagneticelds
  - transmittingaerialsorHFgenerators.
  Thesecanaffectthemeasurement.
• Only use measuring cables, or equipment, appropriate for the oscilloscope’s
specicationswhentakingmeasurements.
G
OPERATING INSTRUCTIONS www.conrad.com
Touch DIGITAL STORAGE
OSCILLOSCOPE
Item no. 1386326
Version 12/15