User manual

RF Explorer User Manual page 18
Configuration Menu
 Backlight: Several levels of display backlight. RF Explorer has good visibility indoor and outdoor,
including direct sunlight. The level of backlight should be the appropriate for each condition, and you
may want to limit backlight brightness to preserve battery capacity.
 Contrast: There are 10 different display contrast levels to choose from.
 USB Bauds: Default is 500Kbps, which is also the recommended setting. In the rare case you
experience a problem when connecting with the PC, you may want to change this to 2400bps slower
speed. However, this is not recommended as the connection will go really slow, so do this only if
there is a good reason to. The port speed in the RF Explorer and PC Client settings must match to
properly establish a connection.
RF Explorer internal battery
The internal battery is a high capacity Lithium-ion polymer of 1000mAh. This is the same battery technology
used in cell phones and modern laptops and tablet computers.
The power switch is a true hard switch that connects the battery when in ON position or fully disconnect it in
the OFF position. As the battery is fully disconnected in the OFF position, you can keep your RF Explorer
stored for months and the battery will keep the charge intact, as opposed to cell phones or laptops which
uses a soft switch which slowly discharge the battery by drawing a few microamperes continuously from it.
This doesn't happen in your RF Explorer.
We designed RF Explorer power circuitry in a way you can always have your RF Explorer ready to use!
Note there is actually a self-discharge effect in the battery but it is so negligible that you can store your
device for a year or more and a battery will not be depleted.