User manual

RF Explorer User Manual page 14
Operational Mode menu
The menu display different functional modes available in your Analyzer.
Use [Up] and [Down] arrow keys to select the desired mode and click on [Enter] to activate it immediately.
 RF Generator mode is the default mode, this is used for carrier CW signals
 Frequency Sweep, available by upgrading to Firmware v1.12 Beta 14 or newer, allows a
programmable frequency sweep to cover every frequency from start/stop and sweep hop.
 Currently Amplitude Sweep mode is under development and will be released soon. Trying to use
these features at the moment will display this message on screen:
 RF Connections enumerates the installed RF modules and how each one is connected to each SMA
RF port. This example below shows a standard RFE6GEN model with 24 to 6000MHz. Click on any key
to get out of this screen.
 About displays information about installed firmware and versioning. Use any key to get out of this
screen.