User manual

This product complies with the legal national and European requirements.
Intended use
Thedigitaloscilloscopeisintendedtobeusedforvisualisingelectricalmagnitudesandsignals.
Themeasuringleadsareconnectedtotheoscilloscopevia3.5mmconnectors.
Themeasuredsignalscanbestoredanddisplayedasareference.Thecontrolofthedeviceis
performed via VDU-based control menus.
Themaximumcorrelatedinputquantitiesindicatedonthedevicemustneverbeexceeded.
A signal generator is also integrated into the instrument.
Any use other than that described above could lead to damage to this product and involves
riskssuchasshortcircuits,re,electricshock,etc.
Nopartoftheproductmaybemodiedorrebuilt,andthehousingmustnotbeopened.
Measurements are not permitted in damp rooms or outdoors, nor under adverse environmental
conditions.
Adverse environmental conditions are:
- Dampness or high air humidity,
- dust and combustible gases, vapours or solvents,
- thunderstormsorsimilarweatherconditionssuchasstrongelectrostaticeldsetc.
Thisquickguideexplainssafetymeasurestomakeworkingwiththedeviceassafeaspossible.
TheindividualfunctionsofthedevicearedescribedinmoredetailintheEnglishoperating
instructions.
Always observe the safety notes included in these operating instructions.
ThisproductcomplieswiththelegalnationalandEuropeanrequirements.Allnamesofcompa-
nies and products are the trademarks of the respective owners. All rights reserved.
Package content
Digital oscilloscope
measuring lead
Storage bag
Metal stand
• Screwdriver
Instructions in English
Quick guide
Up-to-date Operating Instructions:
1. Open produktinfo.conrad.com in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item
numberintothesearcheld.Aftersubmittingthequery
you can download displayed records.
Symbols
An exclamation mark inside a triangle refers to important notes in the operating
instructions.
Thelightningsymbolinsideatrianglewarnsofelectricshockdangerortheimpair-
ment of the electrical safety of the appliance.
The“hand”symbolindicatesspecialinformationandadviceonoperatingthedevice.
A Start/Stop measuring // Selecting saved data
B Automatic settings
▲ Up
▼ Down
OK Menu / Save settings
◄ (left/decrease)thesettings
► (right/increase)thesettings
Safety instructions
Please read through the instructions carefully before using of the device; they
contain important information on its correct operation.
Thewarrantywillbevoidintheeventofdamagecausedbyfailuretoobservethese
safety instructions! We do not assume any liability for any resulting damage!
For damage to property or personal injury caused by inappropriate handling or dis-
regardofthesecurity,wedonotassumeanyliability!Thewarranty/guaranteewill
be void in such cases.
• Theunauthorisedconversionand/ormodicationoftheproductisnotpermitted
forsafetyandapprovalreasons(CE).Donotdisassembletheproduct.
• This product is not a toy. Therefore, be especially careful when children are
around.
First, connect the measurement cable to the oscilloscope; then connect the probe
tothe signalmeasuring circuitto be tested.Afternishing themeasurements,
rstdisconnectthemeasurementleadsfromthecircuitbeforeyoudisconnectthe
cable from the oscilloscope.
Be especially cautious when dealing with voltages exceeding >30 V AC or >30 V
DC! Even at these voltages, there is a danger of fatal electric shock if you touch
electric conductors.
Prior to each measurement, check your meter and its measuring leads for
damage(s).Nevertakeanymeasurementsiftheprotectinginsulationisdefective
(torn,missing,etc.).
• Toeliminatetherisksofelectricshock,donotdirectlyorindirectlytouchthecon-
nections/measuring points during measurements.
Never touch the probes outside of the marked handling area during a measure-
ment.Thereisdangerofalife-threateningelectricshock.
Do not use the appliance shortly before, during or shortly after a thunderstorm
(lightning!/overvoltage!).Makesurethatyourhands,shoes,clothing,theoor,
the measuring device and/or measuring lines, circuits and circuit components are
always dry.
• Donotusetheproductinsideofrooms,orinpoorambientconditions,wheream-
mable gases, vapours or explosive dust may be present or are present.
Do not operate the device near to:
- strongmagneticorelectromagneticelds
- transmittingaerialsorHFgenerators
Thesecanaffectthemeasurement.
• Only use measuring cables, or equipment, appropriate for the oscilloscope’s
specicationswhentakingmeasurements.
G
OPERATING INSTRUCTIONS www.conrad.com
DIGITAL STORAGE-
OSCILOSCOP Nano V3
Item no. 1386325
Version 12/15