Datasheet

MATERIAL or METHODS
Specifications
ISSUE: O
MODEL: 1020-15-003-001 NUMBER:
Page 8 of 9
1)Allowable Range for Use 工作范围
Pay attention to Voltage and Current ranges for use, and Use the vibration motor
in the Condition accordance with this specifications, or else the life and
performance should be considerably reduced.
注意电压及电流的使用范围，并且要按本规格书的要求使用电机，否则电机的使用寿命
和性能将发生显著的下降。
2)Storage 储存
Standard Storage Temperature: -5-30℃
Standard Storage Relative Humidity: ≤75%
Avoids Storing in high temperature, High humidity or corrosive Gas Environment.
标准储存温度: -5-30℃
标准储存相对湿度: ≤75%
避免放置在高温，潮湿及有腐蚀性气体的环境中。
3)Handling of Motor 电机使用
Do not press the product with more than 0.5Kgf or drop it, It can cause the
transformation of performance or external appearance.
不许在电机上面施加0.5Kgf以上的压力或使其跌落，这样可能会影响其性能或使外观发生
变形。
Do not drop into fluid. (such as Water, Alcohol, etc.)
要防止与液体接触。(水，酒精，等）
Do not expose this product to high temperature for extended periods of time, It may
cause a decline in performance.
长时间放置在高温环境时有可能影响其电机的性能。
Please refrain from operating the Motors near Magnetic devices.
要避免放置在磁性物体附近。
The motor may cause slight electronic noise due to the contact between brush and
Commutator.
由于电刷与整流子的接触电机有可能发生微弱的电子噪音。
Rust of plate(steel) and similar edge should be OK
钢板面或边缘有少许锈斑是允许的