Datasheet

 16x DMA request lines

 Various operating modes

 Single DMA mode

 Burst DMA mode

 Memory to memory transfer

 Memory to peripheral transfer

 Peripheral to memory transfer

 Peripheral to peripheral transfer

 Support for 8/16/32 bit wide transactions

 Big endian and little endian (default) support

The ARTIK 530 Module has one real time clock (RTC) module. The most important features of the RTC are:

 Four spread spectrum PLLs

 Two external crystals : one 24MHz crystal for PLL, one 32.768KHz crystal for RTC

 32-bit RTC counter

 Support for alarm interrupt using RTC

The ARTIK 530 Module provides one video input processor (VIP). The key features of the VIP sub-system are:

 Support for external 8-bit and 16-bit MIPI-DSI

 Support for internal MIPI-CSI

 Support of images up to 8192x8192

 Support for clipping and scale-down

 Support for YUV420 memory format

The ARTIK 530 Module provides one universal scaler. The key features of the scaler are:

 Support for different input formats

 YUV420, YUV422, YUV444

 Flexible size, from 8x8 up to 1920x1080 with a granularity of 8

 Upscale ratio from 8x8 to 1920x1080

 Downscale ratio from 1920x1080 to 8x8

 Low pass filter available after upscale or before downscale

 Horizontal 5-tab filter with 64 sets of coefficients

 Vertical 3-tab filter with 32 sets of coefficients

The ARTIK 530 Module provides one integrated Multi Format Codec (MFC) module. The key features of the MFC sub-system

are:

 Decoder

 H.264 : BP, MP, HP Level 4.2 up to 1920x1080, up to 50MBps

 MPEG4 : Advanced Simple Profile (ASP) up to 1920x1080, up to 40Mbps

 H.263 : Profile 3 up to 1920x1080, up to 20Mbps

 MPEG 1,2 : Main Profile, High Level up to 1920x1080, up to 80MBps

 Encoder

 H.264 : Baseline profile, Level 4.0 up to 1080p, up to 20Mbps

 MPEG4 : Simple profile, Level 5.6 up to 1080p, up to 20Mbps

 H.263 : Profile 3, Level 70 up to 1080p, up to 20Mbps