Datasheet

12
 Support for HSIC version 1.0
The ARTIK 530 Module provides one 4-lane mobile industry processor interface (MIPI) interface that complies with the MIPI
camera serial interface (CSI) standard specification V1.01r06 and D-PHY standard specification v1.0. The key features of the
MIPI CSI sub-system are:
 Supports 1, 2, 3 or 4 data lanes
 Supported image formats are:
 YUV420, YUV420 (Legacy), YUV420 (CSPS), 8-bit YUV422, 10-bit YUV422
 User defined Byte based data packet
 Compatible to PPI (Protocol to PHY interface)
The ARTIK 530 Module provides one 4-lane MIPI interface that complies with the MIPI DSI standard specification V1.01r11.
The key features of the MIPI DSI sub-system are:
 Maximum resolution ranges up to 1920x1080
 Supports 1, 2, 3 or 4 data lanes
 Supports pixel format:
 16bpp, 18bpp packed, 18bpp loosely packed (3 byte), 24bpp
 Supported interfaces are:
 Protocol-to-PHY Interface (PPI) up to 1.5Gbps, in MIPI D-PHY
 RGB Interface for video image input from display controller
 PMS control interface for PLL to configure byte clock frequency
 Pre-scaler to generate escape clock from byte clock
The ARTIK 530 Module provides one HDMI v1.4a interface. The key features of the HDMI sub-system are:
 Support for v1.4a spec
 Up to 1080p video resolution
 HDMI Link + HDMI PHY
 Support for the following video formats:
 480p@59.94/60Hz
 576p@50Hz
 720p@50/59.94/60Hz
 1080p@50/59.94/60Hz (No support for interlaced format)
 Support for 4:4:4 RGB
 Support for up to 8-bits per color
The ARTIK 530 Module provides five low voltage differential signaling (LVDS) output channels with one clock channel. The key
features of the LVDS channel system are:
 Output clock range 30-125MHz
 Support for 630 Mbps per channel
 Up to 393.75MB/s data transport
 Support for power down mode
The ARTIK 530 Module provides one Gigabit EMAC interface. The most important features of the Ethernet MAC module are:
 Standard compliance
 IEEE 802.3az-2010: energy efficient Ethernet (EEE)
 RGMII v2.6