Datasheet

11
 Support for 20 and 40MHz bandwidth (72.2/150Mbps PHY rate)
 Enhanced Wi-Fi
®
/Bluetooth
®
Coexistence control to improve transmission quality in different profiles
The ARTIK 530 Module has a fully-integrated Bluetooth
®
block 4.2 (BLE+Classic). The most important hardware features of the
Bluetooth
®
module are:
 Bluetooth
®
4.2 (BLE+Classic)
 Enhanced Wi-Fi
®
/Bluetooth
®
Coexistence control to improve transmission quality in different profiles
The ARTIK 530 Module carries fully-integrated 802.15.4 functionality. The most important hardware features are:
 Fully integrated 2.4 GHz, IEEE 802.15.4 compliant transceiver
 Complete system-on-chip using 32-bit ARM
®
Cortex
®
-M4 processor
 Flash and RAM memory and peripherals.
 Extremely low power consumption.
 Excellent RF performance.
 Single-voltage operation.
 Supported Protocols:
 ZigBee
 Thread
The ARTIK 530 Module provides one USB2.0 OTG interface supporting both device and host functionality. The key features of
the USB2.0 OTG sub-system are:
 In compliance with the USB 2.0 on-the-go specification revision 1.3a and 2.0
 Operates in high speed (480Mbps) mode
 Operates in full speed (12Mbps) mode
 Operates in low speed (1.5Mbps, host only) mode
 Supports session request protocol (SRP) and host negotiation protocol (HNP)
 One control endpoint 0 for control transfer
 Supports up to 15 device-programmable endpoints:
 Programmable endpoint type: Bulk, Isochronous, Interrupt
 Programmable In/Out direction
 Supports 16 host channels
The ARTIK 530 Module provides one USB2.0 Host controller that is fully compliant with the USB 2.0 specifications, and the
enhanced host controller Interface (EHCI) specification. The key features of the USB2.0 OTG sub-system are:
 Detecting the attachment and removal of USB devices
 Collecting status and activity statistics
 Controlling power supply to attached USB devices
 In compliance with the UTMI+ Level 3 revision 1.0
 Controlling the association to either the open host controller interface (OHCI) or the EHCI via a port router
 Root Hub functionality to support up/down stream port
The ARTIK 530 Module provides one high speed inter chip (HSIC) version 1.0 module. The key features of the HSIC sub-system
are:
 Support for ping and split transactions
 Up to 30MHz operation for a 16-bit interface
 Up to 60MHz operation for a 8-bit interface