Datasheet

MLX90640 32x24 IR array
Datasheet
Page 19 of 60
REVISION 11 – 3 AUGUST 2018
10.7.3.
10.7.3.10.7.3.
10.7.3. EEPROM
EEPROMEEPROM
EEPROM
The EEPROM is used to store the calibration constants and the configuration parameters of the device
EEPROM address
Access
Meaning
0x2400 Melexis Melexis reserved
0x2401 Melexis Melexis reserved
0x2402 Melexis Melexis reserved
0x2403 Melexis Configuration register
0x2404 Melexis Melexis reserved
0x2405 Melexis Melexis reserved
0x2406 Melexis Melexis reserved
0x2407 Melexis Device ID1
0x2408 Melexis Device ID2
0x2409 Melexis Device ID3
0x240A Melexis Device Options
0x240B Melexis Melexis reserved
0x240C Customer Control register_1
0x240D Customer Control register_2
0x240E Customer I2CConfReg
0x240F Customer Melexis reserved / I2C_Address
Table 7 Configuration parameters memory
After POR the device read dedicated EEPROM cells and transfers their content to into the control and configuration register
of the device. This way the device is configured and prepared for operation. The relation between EEPROM and register
address is shown here after (explanation of the bit meaning can be found in section 10.7.1 Internal registers:
EEPROM address
Register address
Access
Name
Data [hex]
0x240C 0x800D Customer Control_register_1 1901
0x240D 0x800E Customer Control_register_2 0000
0x240E 0x800F Customer I2CConfReg 0000
0x240F 0x8010
Customer Melexis internal use (8 bit)
I2C_Address (8bit)
BE33
Table 8 EEPROM to registers mapping