Datasheet

DocID17530 Rev 2 15/54
LIS3DH Mechanical and electrical specifications
54
2.5 Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Note: Supply voltage on any pin should never exceed 4.8 V
Table 9. Absolute maximum ratings
Symbol Ratings Maximum value Unit
Vdd Supply voltage -0.3 to 4.8 V
Vdd_IO I/O pins Supply voltage -0.3 to 4.8 V
Vin
Input voltage on any control pin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
-0.3 to Vdd_IO +0.3 V
A
POW
Acceleration (any axis, powered, Vdd = 2.5 V)
3000 g for 0.5 ms
10000 g for 0.2 ms
A
UNP
Acceleration (any axis, unpowered)
3000 g for 0.5 ms
10000 g for 0.2 ms
T
OP
Operating temperature range -40 to +85 °C
T
STG
Storage temperature range -40 to +125 °C
ESD Electrostatic discharge protection 2 (HBM) kV
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part.
This device is sensitive to electrostatic discharge (ESD), improper handling can
cause permanent damage to the part.