Datasheet

Table Of Contents
LARA-R2 series - Data Sheet
UBX-16005783 - R15 Functional description Page 8 of 48
4G LTE
3G UMTS/HSDPA/HSUPA
2G GSM/GPRS/EDGE
Data rate
LTE category 1:
up to 10.3 Mbit/s DL,
up to 5.2 Mbit/s UL
Data rate
HSDPA category 8:
up to 7.2 Mbit/s DL
HSUPA category 6:
up to 5.76 Mbit/s UL
Data rate
5
GPRS multi-slot class 33
6
, CS1-CS4,
up to 107 kbit/s DL, up to 85.6 kbit/s UL
EDGE multi-slot class 33
6
, MCS1-MCS9,
up to 296 kbit/s DL, up to 236.8 kbit/s UL
Table 2: LARA-R2 series LTE, 3G and 2G characteristics
LARA-R2 modules provide Voice over LTE (VoLTE)
7
as well as Circuit-Switched-Fall-Back (CSFB)
8
audio capability.
1.5 AT command support
The LARA-R2 series modules support AT commands according to 3GPP standards TS 27.007 [7],
TS 27.005 [8] and the u-blox AT command extension.
For the complete list of all supported AT commands and their syntax, see the u-blox AT
Commands Manual [1].
RIL (Radio Interface Layer) software for Android and Embedded Windows is available for LARA-R2
series modules free of charge; see the Android RIL Production delivery [3] application note for the
supported software deliveries and more information.
5
GPRS/EDGE multi-slot class determines the number of timeslots available for upload and download and thus the speed at
which data can be transmitted and received, with higher classes typically allowing faster data transfer rates.
6
GPRS/EDGE multi-slot class 33 implies a maximum of 5 slots in DL (reception) and 4 slots in UL (transmission) with 6 slots in
total.
7
Not supported by LARA-R204 and LARA-R280 modules “02” product version, LARA-R220 modules “62” product version.
8
Not supported by LARA-R203, LARA-R204 and LARA-R220 modules.