Datasheet

LARA-R2 series - Data Sheet
UBX-16005783 - R15 Product handling & soldering Page 40 of 48
7.1.2 Tapes
Figure 5 shows the position and the orientation of LARA-R2 modules as they are delivered on the tape,
while Figure 6 and Table 35 specify the tape dimensions.
Pin 1 Sprocket hole
Feed direction
Figure 5: Orientation for LARA-R2 series modules on tape
Figure 6: LARA-R2 series modules tape dimensions
Parameter
Typical Value
Tolerance
Unit
A
0
24.9
0.2
mm
B
0
26.8
0.2
mm
K
0
3.5
0.2
mm
Table 35: LARA-R2 series modules tape dimensions
☞ 10 sprocket hole pitch cumulative tolerance ± 0.2 mm.
☞ Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole.
☞ A
0
and B
0
are measured on a plane at a distance “R” above the bottom of the pocket.