Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 2 Interfaces
- 3 Pin definition
- 4 Electrical specifications
- 4.1 Absolute maximum rating
- 4.2 Operating conditions
- 4.2.1 Operating temperature range
- 4.2.2 Supply/power pins
- 4.2.3 Current consumption
- 4.2.4 LTE RF characteristics
- 4.2.5 3G RF characteristics
- 4.2.6 2G RF characteristics
- 4.2.7 ANT_DET pin
- 4.2.8 PWR_ON pin
- 4.2.9 RESET_N pin
- 4.2.10 SIM pins
- 4.2.11 USB pins
- 4.2.12 HSIC pins
- 4.2.13 DDC (I2C) pins
- 4.2.14 Generic Digital Interfaces pins
- 5 Mechanical specifications
- 6 Qualification and approvals
- 7 Product handling & soldering
- 8 Default settings
- 9 Labeling and ordering information
- Appendix
- A Glossary
- Related documents
- Revision history
- Contact
LARA-R2 series - Data Sheet
UBX-16005783 - R15 Mechanical specifications Page 37 of 48
☞ Module Height tolerance +/–0.20 mm may be exceeded close to the corners of the PCB due to the
cutting process. In the worst case, the height could be +0.40 mm more than the typical value.
☞ For information regarding Footprint and Paste Mask recommended for the application board
integrating the cellular module, see the LARA-R2 series System Integration Manual [2].