Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 2 Interfaces
- 3 Pin definition
- 4 Electrical specifications
- 4.1 Absolute maximum rating
- 4.2 Operating conditions
- 4.2.1 Operating temperature range
- 4.2.2 Supply/power pins
- 4.2.3 Current consumption
- 4.2.4 LTE RF characteristics
- 4.2.5 3G RF characteristics
- 4.2.6 2G RF characteristics
- 4.2.7 ANT_DET pin
- 4.2.8 PWR_ON pin
- 4.2.9 RESET_N pin
- 4.2.10 SIM pins
- 4.2.11 USB pins
- 4.2.12 HSIC pins
- 4.2.13 DDC (I2C) pins
- 4.2.14 Generic Digital Interfaces pins
- 5 Mechanical specifications
- 6 Qualification and approvals
- 7 Product handling & soldering
- 8 Default settings
- 9 Labeling and ordering information
- Appendix
- A Glossary
- Related documents
- Revision history
- Contact

LARA-R2 series - Data Sheet
UBX-16005783 - R15 Electrical specifications Page 29 of 48
4.2.5 3G RF characteristics
The 3G bands supported by each LARA-R2 series module are defined in Table 2, while the following
Table 15 describes the Transmitting and Receiving frequencies for each 3G band according to 3GPP
TS 34.121-1 [12].
Parameter
Min.
Max.
Unit
Remarks
Frequency range
Band 5 (850 MHz)
Uplink
824
849
MHz
Module transmit
Downlink
869
894
MHz
Module receive
Frequency range
Band 2 (1900 MHz)
Uplink
1850
1910
MHz
Module transmit
Downlink
1930
1990
MHz
Module receive
Frequency range
Band 1 (2100 MHz)
Uplink
1920
1980
MHz
Module transmit
Downlink
2110
2170
MHz
Module receive
Table 15: 3G operating RF frequency bands
LARA-R2 series modules include a UE Power Class 3 3G transmitter (see Table 2), with output power
and characteristics according to 3GPP TS 34.121-1 [12].
LARA-R2 series modules 3G receiver characteristics are compliant to 3GPP TS 34.121-1 [12], with 3G
conducted receiver sensitivity performance described in Table 16.
Parameter
Min.
Typical
Max.
Unit
Remarks
Receiver input sensitivity
Band 5 (850 MHz)
–115.0
dBm
Downlink RF level for RMC @ BER < 0.1%
Receiver input sensitivity
Band 2 (1900 MHz)
–114.0
dBm
Downlink RF level for RMC @ BER < 0.1%
Receiver input sensitivity
Band 1 (2100 MHz)
–114.0
dBm
Downlink RF level for RMC @ BER < 0.1%
Condition: 50 source, dual receiver, other settings as per 3GPP TS 34.121-1 [12]
Table 16: 3G receiver sensitivity performance










