Datasheet
Table Of Contents
- Document Information
- Contents
- 1 Functional description
- 2 Interfaces
- 3 Pin definition
- 4 Electrical specifications
- 4.1 Absolute maximum rating
- 4.2 Operating conditions
- 4.2.1 Operating temperature range
- 4.2.2 Supply/power pins
- 4.2.3 Current consumption
- 4.2.4 LTE RF characteristics
- 4.2.5 3G RF characteristics
- 4.2.6 2G RF characteristics
- 4.2.7 ANT_DET pin
- 4.2.8 PWR_ON pin
- 4.2.9 RESET_N pin
- 4.2.10 SIM pins
- 4.2.11 USB pins
- 4.2.12 HSIC pins
- 4.2.13 DDC (I2C) pins
- 4.2.14 Generic Digital Interfaces pins
- 5 Mechanical specifications
- 6 Qualification and approvals
- 7 Product handling & soldering
- 8 Default settings
- 9 Labeling and ordering information
- Appendix
- A Glossary
- Related documents
- Revision history
- Contact
LARA-R2 series - Data Sheet
UBX-16005783 - R15 Pin definition Page 21 of 48
No
Name
Power
domain
I/O
Description
Remarks
19
GPIO6
GDI
O
Clock output
Configurable clock output (see section 2.7).
Output driver class A. PU/PD class a.
Value at internal reset: T/PD.
See section 4.2.14 for detailed electrical specs.
20
GND
-
N/A
Ground
All the GND pins must be connected to ground
21
HOST_SELECT
GDI
I/O
Selection of module / host
processor configuration
Not supported by “02” and “62” product versions.
Output driver class A. PU/PD class a.
Value at internal reset: T/PD.
See section 4.2.14 for detailed electrical specs.
22
GND
-
N/A
Ground
All the GND pins must be connected to ground
23
GPIO2
GDI
I/O
GPIO
GPIO configurable as described in section 2.8.
Output driver class A. PU/PD class a.
Value at internal reset: T/PD.
See section 4.2.14 for detailed electrical specs.
24
GPIO3
GDI
I/O
GPIO
GPIO configurable as described in section 2.8.
Output driver class A. PU/PD class a.
Value at internal reset: T/PD.
See section 4.2.14 for detailed electrical specs.
25
GPIO4
GDI
I/O
GPIO
GPIO configurable as described in section 2.8.
Output driver class A. PU/PD class a.
Value at internal reset: T/PD.
See section 4.2.14 for detailed electrical specs.
26
SDA
DDC
I/O
I
2
C bus data line
Fixed open drain.
See section 4.2.13 for detailed electrical specs.
27
SCL
DDC
O
I
2
C bus clock line
Fixed open drain.
See section 4.2.13 for detailed electrical specs.
28
USB_D-
USB
I/O
USB Data Line D-
90 nominal differential characteristic impedance.
Pull-up, pull-down and series resistors as required by the
USB 2.0 specifications
[15] are part of the USB pin driver,
and need not be provided externally.
See section 4.2.11 for detailed electrical specs.
29
USB_D+
USB
I/O
USB Data Line D+
90 nominal differential characteristic impedance.
Pull-up, pull-down and series resistors as required by the
USB 2.0 specifications
[15] are part of the USB pin driver,
and need not be provided externally.
See section 4.2.11 for detailed electrical specs.
30
GND
-
N/A
Ground
All the GND pins must be connected to ground
31
RSVD
-
N/A
RESERVED pin
Leave unconnected.
32
GND
-
N/A
Ground
All the GND pins must be connected to ground
33
RSVD
-
N/A
RESERVED pin
This pin has special function: it must be connected to GND
to allow module to work properly.