Datasheet

Datasheet [Page 26]
EMW3166
The matters needing attention 5.3
 In the entire production, Each station of the operator must wear anti-static gloves;
 When baking, no more than baking time;
 When roasting, it is forbidden to join explosive, flammable, corrosive substances;
 When baking, high temperature module application tray in the oven, keep the air circulation between each
module, at the same time avoid direct contact with the oven wall module;
 Baking, please will bake the door is closed, the guarantee baking box sealing, prevent leakage,
temperature influence the baking effect;
 Don't open the door, as far as possible when baking box running if must open, shortening the time of can
open the door as far as possible;
 After baking, must be natural cooling modules to < 36 ℃ before wear anti-static gloves out, so as not to
burn.
 Operation, forbidden module bottom touch water or dirt;
 Temperature and humidity control level for Level3, storage and baking conditions based on IPC/JEDEC J
- STD - 020.
MSL/Storage Condition 5.4
Figure 14 torage Condition
Recommended Reflow Profile 5.5
Solder paste recommendations: SAC305, Lead -Free solder paste.