Datasheet

Feature
SARK-110
SARK-110-ULM
Display
3”Color 400 x 200 pixels
2”Monochrome 128 x 64 pixels
Frequency range
0.1 – 230 MHz
1-Hz resolution
+- 30-ppm stability
0.1 – 160 MHz and up to 700
MHz with reduced performances
1-Hz resolution
+- 30-ppm stability
Output signal
shape
Sinusoidal
Square
Output power
(measurements)
≈-12 dBm
≈ -14 dBm
Output power
(signal generator)
Programmable from -73 to -10
dBm
≈-14 dBm (Low) and -9 dBm
(High)
Test port
connector type
MCX (included MCX to SMA
adaptor)
SMA
Measured
parameters
VSWR, Rs, Xs, Rp, Xp, |Zs|,
<Zs, RL, CL, |Rho|, <Rho, %Ref
PWR, Q, Cs, Cp, Ls, Lp
VSWR, Rs, Xs, Rp, Xp, |Zs|, <Zs,
RL, CL, |Rho|, <Rho, %Ref PWR,
Q, Cs, Cp, Ls, Lp
Reactance sign
measurement
Yes
Yes
Narrowband
detectors
Two narrowband detectors
Two 12-bit ADCs
Two narrowband detectors
Two 12-bit ADCs
Return loss
dynamic range
0 to -60 dB
0 to -60 dB
Measurement
limits
VSWR < 100:1, |Z| < 100K, |R| <
100K, |X| < 100K, |Rho| < 0.98,
C < 100 nF, L < 100 mH, -180 <
ϴ < 180
VSWR < 100:1, |Z| < 100K, |R| <
100K, |X| < 100K, |Rho| < 0.98, C <
100 nF, L < 100 mH, -180 < ϴ <
180
Sweep frequency
resolution
258 points (258 to10000 indeep
sweep mode)
102 points (102 to10000 indeep
sweep mode)