Datasheet

The SARK-110-ULM is the entry-level model of the SARK-110 antenna analyzer

series. This is a truly pocket-size device, so you can take it anywhere. The built-in

battery lasts up to eight hours on a single charge. It features a graphical display and an

intuitive user interface that makes it easy to operate.

The native measurement frequency range is between 0.1 and 160 MHz, but it operates

up to 700 MHz with reduced performances. It has full vector measurement capability

and accurately resolves the resistive, capacitive and inductive components of a load.

The functionality is not restricted to antenna analysis, but it is a multipurpose

instrument featuring a Time Domain Reflectometer (TDR) mode which is intended

for fault location and length determination in coaxial cables; as well as an RF signal

generator. The analyzer is designed for standalone operation, but it can be controlled

from your desktop using SARK Plots for Windows and from your tablet or

smartphone using SARK Plots for Android through USB or short-range Bluetooth

LE.

Typical applications include checking and tuning antennas, impedance matching,

component test, cable fault location, measuring coaxial cable parameters, and cutting

coaxial cables to precise electrical lengths. As a signal generator, it is ideal for

receiver calibration, sensitivity tests, and signal tracing.

Features



Pocket size and lightweight



Frequency range up to 700 MHz



Resolves the sign of impedance



Excellent accuracy over a broad range of impedances



USB and short-range Bluetooth LE connectivity



Compatible with all SARK-110 software



Lifetime free firmware upgrades available, open to community requested features

PAGE 1
The SARK-110-ULM is the entry-level model of the SARK-110 antenna analyzer series. This is a truly pocket-size device, so you can take it anywhere. The built-in battery lasts up to eight hours on a single charge. It features a graphical display and an intuitive user interface that makes it easy to operate. The native measurement frequency range is between 0.1 and 160 MHz, but it operates up to 700 MHz with reduced performances.
PAGE 2
Specification Frequency range 0.
PAGE 3
Feature SARK-110 SARK-110-ULM Display 3”Color 400 x 200 pixels 2”Monochrome 128 x 64 pixels Frequency range 0.1 – 230 MHz 0.
PAGE 4
Impedance reading in open circuit Internal data memory OSL Calibration USB    Wireless interface Battery Modes        Special functions          3-sec sweep time (normal) 1.
PAGE 5
Software Dimensions Package contents    SARKPlots for Windows and Android SARKPlots for Windows and Android 98 x 60 x 14.5 (mm) Weight: 120-g 105 x 67 x 15 (mm) Weight: 110-g SARK-110 x 1 with built-in battery  MCX to SMA female connector adapter x 1 SMA plug to SMA female8”(20cm) cable adapter x 1 Part List 1 x SARK-110-ULM Antenna Analyzer ECCN/HTS ECCN 3B992.b.