Datasheet

9397 750 XXXXX © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Short form data sheet Rev. 1.2 — 31 March 2011 4 of 25
Philips Semiconductors
PN532/C1
NFC controller
[1] DVDD, AVDD and TVDD shall always be connected together.
[2] It is not allowed to have PVDD above VBAT
[3] The total current consumption depends also on the firmware version (different internal IC clock speed)
6. Ordering information
[1] 01 is the reference of the romcode version.
[2] A purchaser of this Philips IC has to take care for appropriate third party patent license.
I
SVDD
SVDD Supply Current VBAT=5V,
SVDD switch
on
30 mA
I
AVDD
Analog Supply Current IVBAT=5V, RF
level detector
on
[1]
6 mA
I
TVDD
Transmitter (TX) Supply
Current
During RF
VBAT=5V, 40Ω
typical TX Z
load
(min. tbd)
[1]
60 100 mA
I
VBAT
continuous total current
consumption
Ta m b = -30 to +
85
°C, 40Ω
typical TX Z
load
(min tbd),
excluding the
secure
companion chip
[3]
91 140 mA
Tamb operating ambient
temperature
-30 +85 °C
Table 1: Quick reference data …continued
Symbol Parameter Conditions Min Typ Max Unit
Table 2: Ordering information
Type number Package
Name Description Version
PN5320A3HN/C101
[1]
HVQFN40 plastic, heatsink very thin quad flat package; no leads; 40terminals;
body 6x 6x 0.85mm
SOT618-1
PN5321A3HN/C101
[2]
HVQFN40 plastic, heatsink very thin quad flat package; no leads; 40terminals;
body 6x 6x 0.85mm. Type B SW is enable.
SOT618-1