Instructions

 4. Mount the loudspeaker to the front panel of the enclosure. Pay attention to the
position of the loudspeaker.
 5. Connect 3.5mm jack cable wire from Raspberry Pi 3.5mm jack port to USB
Joystick board's 3.5mm jack port.
 6. Connect USB-to-MicroUSB cable wire from Raspberry Pi's USB port to USB
Joystick board's microUSB port.
 7. Hook up wire cable to the USB joystick board, Please make sure the joystick
connect to the right position on the board.
 7. Place four slices on the bottom of the and fixed everything with long Binding
screws.