Datasheet

Voice Interaction Development Kit
Congratulations, you’ve just assembled your
Now you’re ready to connect your kit to the Snips Voice Platform.
1. Power the kit with the default power adapter included, or use a 5.0V-3.0A
DC adapter with a Micro USB connector.
2. Install the Snips assistant on the Raspberry Pi. To save you setup time, the
MicroSD card included in your kit has been flashed with the full functional
system image, which means the Snips assistant is ready for your trigger
words (in English). We suggest you review the step-by-step installation guide
by visiting https://docs.snips.ai/getting-started/quick-start-raspberry-pi
to learn the sam tool in command line.
3.Trigger the assistant by first saying “Hey Snips”, followed by these
commands:
Command Action
What’s the temperature? Responds with the current temperature
What’s the humidity? Responds with the current humidity
Turn the relay on. The relay closes and the red LED turns on
Turn the relay off. The relay opens and the red LED turns off