Voice Interaction Development Kits
Voice Interaction Development Kits
Meet your new Voice Interaction Development Kit This kit from Snips and Seeed empowers you to build your own personal, private by design voice assistant with natural language processing and automatic speech recognition powered by the Snips AI Voice Platform. You’ll learn how to assemble your sleek open-hardware pegboard with a Seeed ReSpeaker 2-Mics Pi HAT and a Raspberry Pi, and connect the hardware to the Snips voice assistant.
1.1 What’s in the kit 5 Acrylic Table Stand 1.2 1 Raspberry Pi3 B+ (1.1) or Raspberry Pi Zero W (1.
How to build it
Step 1 Place all standoffs on the front of the mounting board and fix them with screws from behind.
Step 2 Place all hardware components on the standoffs and screw in place.
Step 3 Mount the blue acrylic cover on top of the Grove Relay module and secure with 3 screws. Insert SD card into Raspberry Pi. NOTE: take care to monitor the Grove Relay when the kit is powered on, since the working voltage will be high.
Step 4 The kit can be placed in two ways. You can either keep your kit on a horizontal surface as a stand using the two included table stands, or you can hang your kit on the wall using the included blue rope.
Congratulations, you’ve just assembled your Voice Interaction Development Kit Now you’re ready to connect your kit to the Snips Voice Platform. 1. Power the kit with the default power adapter included, or use a 5.0V-3.0A DC adapter with a Micro USB connector. 2. Install the Snips assistant on the Raspberry Pi. To save you setup time, the MicroSD card included in your kit has been flashed with the full functional system image, which means the Snips assistant is ready for your trigger words (in English).
What’s Next? You’ve just set up your very own private-bydesign smart speaker! Now that you’ve experienced what’s possible with the Voice Interaction Kit, we’d love to see what you do with it. Get up and running with more tools to help build your own smart speaker projects: https://docs.snips.
