Datasheet

stable. We normally use serial tool to get the IP. Reopen PuTTY , use the SSH module to connect again.
To login through SSH, you need to fill in the Hostname w ith the IP address you've just got.And use port 22,choose the SSH connection type. Just leave the other
options by default. Then simply click Open.
Step 2. Expand SD Card File System
By default, the image enables only 2GB for Raspbian System, it is recommended to expand to use the
w hole SD card (8GB or 16GB). Or the SD card w ill be full soon.
Run below command in the PuTTY terminal to start raspi-config,
sudo raspi-config
Choose “Expand Filesystem”, w hen finished reboot to make it effect. Run below command in the PuTTY terminal to know the SD card capacity and usage.
df -h
Please refer to Raspberry Pi raspi-config tool instruction for details.Click here see more.
Step 3. Use RHF2S001 integrated LoRaWAN server
a) Conne ct Gatew ay w ith inte rnal se rver
Run below commands in the PuTTY terminal, and check the status:
sudo systemctl status pktfwd
If pktfw d service is not active, run below command to start it:
sudo systemctl enable pktfwd
sudo systemctl restart pktfwd
b) Frequency Plan
Frequency Plan for EU868
EU868
Uplink DR
CH0
867.1
DR0 ~ DR5
CH1
867.3
DR0 ~ DR5
CH2
867.5
DR0 ~ DR5
CH3
867.7
DR0 ~ DR5
CH4
867.9
DR0 ~ DR5
CH5
868.1
DR0 ~ DR5
CH6
868.3
DR0 ~ DR5
CH7
868.5
DR0 ~ DR5
Frequency Plan for US915 HYBRID
US915
Uplink DR
CH0
902.3
DR0 ~ DR3
CH1
902.5
DR0 ~ DR3